BARIX Instreamer User Manual download pdf (Page 12)

Instreamer to Exstreamer connection How To

3.1 RTP over Internet

Instreamer: (192.168.110.175)

1 On the Instreamer web UI, the 'Configuration' button gives access to pages that control the device's behaviour.

2 Select the 'Advanced Settings' menu, then 'Audio'

3 Make sure that the '”Bit reservoir mode” is set to “kept empty”

4 “Apply” the change, the device will reboot

5 Select the 'Advanced Settings' menu, then 'Streaming'

6 In the “Streaming Destinations” section

6.1 set the “Conn. Type” to “RTP”

6.2 the public address and port number for the target Exstreamer's firewall must be input; this can be

unicast, multicast, broadcast or DNS. In our example: 84.29.3.105:4444

7 “Apply” the changes, the device will reboot

Router at Exstreamer site (84.29.3.105)

1 The router at the Exstreamer will also require configuration; the firewall must be opened to the Instreamer's

stream and a UDP port forwarding from the firewall to the Exstreamer must be set up – this is explained later in

this document.

Exstreamer: (192.168.1.20)

1 On the Exstreamer web UI, the 'Configuration' button gives access to pages that control the device's behaviour.

2 Select the 'Advanced Settings' menu, then 'Streaming'

3 Set the URL entries 1 – 3 as required, then 'Apply' the changes; the device will reboot.

The URL entry is formatted such that it defines the connection type and source IP:Port e.g. rtp://0.0.0.0:4444 tells

the Exstreamer to accept any RTP stream incoming on port 4444.

URL 1 is the primary link, if it is unavailable, the Exstreamer will automatically failover to URL 2, then 3; in this

way a more robust system can be implemented. See the Streaming Client firmware manual for full details.

Make sure that the port on the Exstreamer URL matches that set on the Instreamer.

BARIX AG | 06.03.2013 | 12/18

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

No comments

BARIX Instreamer User Manual Page 12